Hillco Technologies
NEWManufacturing ServicesDEALERS
Tillage Products »
John Deere Products »
SPRB Systems
  • JB510
Combine Leveling Systems
  • JS Models: Sidehill (18%)
  • JH Models: Hillside (27%)
  • 2970S: Sidehill (18%)
  • 2975H: Hillside (27%)
Lateral Header Tilt Systems
Literature Archives
Case-IH Products »

Use our Return on Investment Calculators



Sidehill18% Slope Compensation

JS5010 Sidehill for S550 Combines
JS7010 Sidehill for S660 & S670 Combines
JS9010 Sidehill for S680 & S690 Combines

The Heart of Every Hillco Leveling System
As combines evolve so do Hillco Leveling Systems. Staying true to the quality and performance of our previous leveling systems, the newly designed undercarriage accommodates today's heavier combines and heads. Hillco keeps the design simple by moving the combine's original transmission to final drive assembly from the combine's main axle to the leveling system's undercarriage. This simple but effective design keeps the treadface of the tires flat on the ground for improved traction, stability, and flotation. Go even further and equip your combine with dual tires and you can tackle any terrain.

Sidehill Undercarriage

Rear Drop Axle

Rear Drop Axle
The leveling system raises the front of the combine 7 inches to allow for full leveling. Because we raise the front of the combine with the overcarriage/undercarriage, it is also necessary to raise the back of the combine. The function of the rear drop axle is to balance the combine fore/aft. This bolt-on component is located between the combine's main frame and rear axle.

Header Adapter and Header Tilt
As combines and platforms get larger and heavier, Hillco continues to meet the challenge. Staying true to our time tested design; Hillco Leveling Systems are equipped with an advanced master/slave hydraulic circuit, coordinating rotation between the combine chassis, header and ground to deliver optional ground hugging performance. This feature can be performed manually to give you control over unusual ground contours and any nasty terraces. Equip your header with Contour Master Sensors and enjoy the superb performance of fully automated lateral tilt/header height control.

Header Adapter

Crop Feeding System

Crop Feeding System
When you purchase a new John Deere combine with a Hillco Leveling System you will experience maximum throughput. You can be confident that the Hillco crop feeding system is designed for the toughest of feeding conditions, whether it's green viney crops, weeds or short slick straw conditions. The Sidehill models extend the feeder chain and provides excellent feeding in all crops and conditions.

Leveling System Hydraulics — Powerful and Efficient
Hillco's goal is to provide the most efficient product without sacrificing combine performance. With this in mind, we have carefully engineered the Leveling System's hydraulic circuit to compliment each combine model.

JS5010 & JS7010
On the S550, S660 & S670 combines a pump is mounted directly to the output shaft on the combine's rear engine housing; isolating the leveling system's hydraulics from the combine's main hydraulic circuit for improved reliability and simplified diagnostics.

The JS9010 hydraulics are incorporated into the existing S680 & S690 closed center hydraulic system. This simplifies installation and eliminates the need for an additional pump reducing costs.

Leveling System Hydraulics

Leveling System Hydraulics

Electronic Slope Control

Electronics — Responsive and Dependable
At Hillco we strive to deliver trouble free leveling systems. With our precision electronic slope sensing combined with variable speed hydraulic leveling control, we deliver the ultimate in smooth, responsive leveling performance. The clinometer-based slope sensor continuously monitors slope and maintains a level combine chassis. The technology utilized in the leveling controller and hydraulic control valve allows for variable leveling speed. The further the combine is out of level the faster the system corrects and, as the combine chassis approaches level, the leveling rate slows. The variable speed leveling is what allows Hillco Leveling Systems to be both smooth and responsive.

Cab Controls — At your Fingertips
For increased operator convenience the leveling controls are now located in the John Deere CommandTouch Armrest Console. Select Automatic mode and the leveling system corrects for slope changes without any operator input. Select Manual mode and the Automatic leveling is disabled, allowing the operator to have full control over the combine's chassis position. The Manual mode is especially handy for controlling unloading auger height.

Cab Controls

Maximum Level Potentiometer

Maximum Level Potentiometer indicates to the controller the undercarriage position relative to the overcarriage which proportionately slows leveling speed when approaching maximum level. This reduces stress on cylinders and stops, increasing reliability over mechanical switches, and allows the operator to set leveling limits from the cab for added convenience.

A retractable step is installed to the bottom of the ladder allowing for easier access to the cab.


Return to top of page ^
Home    |    Products    |    About Hillco    |    News    |    Testimonials    |    Careers    |    Contact Us
© Hillco Technologies. All Rights Reserved. Hillco is a registered trademark of Hillco Technologies, Inc.