Hillco Technologies
NEWManufacturing ServicesDEALERS
PRODUCTSROI CALCULATORSABOUT HILLCONEWSTESTIMONIALSCONTACT US
John Deere Products »
SPRB Systems
  • JB510
Combine Leveling Systems
  • JS Models: Sidehill (18%)
  • JH Models: Hillside (27%)
  • 2970S: Sidehill (18%)
  • 2975H: Hillside (27%)
Lateral Header Tilt Systems
Literature Archives
Case-IH Products »

Use our Return on Investment Calculators

JB510 SPRB System

OverviewBenefitsFeaturesSpecsFAQLiteratureMedia

Spout Rotate
Adjustable Spout - Linear Actuated Spout tip rotates 40° side to side and mechanically adjustable 10° +/- up and down for optimal material stream control. Spout pivots with chopper for easy shoe access.

Spout Rotate

Spread/Collect Gate
In Collect Mode the gate is up and material is diverted into the spout. In Spread Mode the gate moves down and spreads the MOG like a stock combine. The Spout is compatible with both Vane and PowerCast Tailboards.

Spread/Collect Gate

Hitch
A simple pintle style hitch with quick coupler hydraulic fittings and single electrical connector makes for easy connecting and disconnecting.

Hitch

Caster Wheels
The caster wheels, equipped with torsion suspension, carry the weight of the accumulator and the front of the baler; minimizing weight on the rear of the combine.

Caster Wheels

Feed System
The conveyor and feed rolls provide an even flow of material into the baler, resulting in consistent, square shouldered bales.

Feed System - Shown with front shield removed.

In-Cab Operator Controls
Includes Spread/Collect Mode, Baler Gate Function, Auto/Manual Mode, and Spout Rotation. An LCD monitor displays shaft speed alarms, accumulator level and baler functions. Conveniently placed video cameras and a monitor allow you to view baling operation.

In-Cab Operator Controls

Hydraulics
A hydrostatic pump is installed, powering a high torque, bent axis motor which drives the baler. A gear pump is driven off the straw chopper, powering the conveyor and feed rolls.

Hydraulics

How It Works
Material Other than Grain (MOG) is propelled by the straw chopper into the spout which directs the material into the accumulator.

How It Works

When the accumulator is full of MOG the baler and accumulator feed system engage. Material is fed from the accumulator into the baler. Once the hopper is empty; the baler and accumulator's feed system disengage.

How It Works

Once the bale is the desired size, the baler wraps and ejects the bale while the accumulator collects the MOG. This allows for nonstop harvesting.

How It Works


Return to top of page ^
Home    |    Products    |    About Hillco    |    News    |    Testimonials    |    Careers    |    Contact Us
© 2006-2016 Hillco Technologies. All Rights Reserved. Hillco is a registered trademark of Hillco Technologies, Inc.